Home / Juniper / JN0-661 Braindumps / [2018 Version] JN0-661 Exam Questions with Free PDF and Practice Test Software

[2018 Version] JN0-661 Exam Questions with Free PDF and Practice Test Software

After Deep Analysis our experts prepared Service Provider Routing and Switching JN0-661 Exam practice test that is well formatted, easy to understand and based on the actual Juniper Service Provider Routing and Switching certification exam. A critical part of our expert is detecting and evaluating the best solutions for students. We are sure that after using Realquestions2017 Juniper JN0-661 Exam Questions, you will pass Service Provider Routing and Switching JN0-661 exam in the first attempt.

♥ VALID JN0-661 Exam Questions 2018 ♥

JN0-661 exam questions, JN0-661 PDF dumps; JN0-661 exam dumps:: https://www.dumpsschool.com/JN0-661-exam-dumps.html (133 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)

Latest Juniper JN0-661 Dumps Exam Questions and Answers:

Version: 8.0
Question: 21

— Exhibit –

— Exhibit —
Click the Exhibit button.
In the exhibit, an OSPF virtual link is established between R2 and R3. However, R4 cannot reach any external destinations.
What must you do you allow R4 to reach external destinations?

A. Area 1 must be configured as a stub area.
B. Area 1 must be configured as a standard OSPF area.
C. Area 1 must be configured to use the Type 3 LSAs as the default LSA.
D. The virtual link must be configured under Area 1.

Answer: B

Question: 22

— Exhibit —
[email protected]> show route receive-protocol rip 2.2.2.2
inet.0: 15 destinations, 15 routes (15 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
50.50.0.0/26 *[RIP/100] 00:09:12, metric 2, tag 0
> to 2.2.2.2 via fe-3/0/0.2
50.50.1.0/24 *[RIP/100] 00:32:24, metric 2, tag 0
> to 2.2.2.2 via fe-3/0/0.2
50.50.2.0/24 *[RIP/100] 00:32:24, metric 2, tag 0
> to 2.2.2.2 via fe-3/0/0.2
50.50.3.0/25 *[RIP/100] 00:32:24, metric 2, tag 0
> to 2.2.2.2 via fe-3/0/0.2
50.50.4.0/25 *[RIP/100] 00:32:24, metric 2, tag 0
> to 2.2.2.2 via fe-3/0/0.2
50.50.4.128/25 *[RIP/100] 00:32:24, metric 2, tag 0
> to 2.2.2.2 via fe-3/0/0.2
50.50.5.0/26 *[RIP/100] 00:32:24, metric 2, tag 0
> to 2.2.2.2 via fe-3/0/0.2
50.50.5.64/26 *[RIP/100] 00:32:24, metric 2, tag 0
> to 2.2.2.2 via fe-3/0/0.2
50.50.5.128/26 *[RIP/100] 00:32:24, metric 2, tag 0
> to 2.2.2.2 via fe-3/0/0.2
— Exhibit —
Click on the Exhibit button.
Referring to the exhibit, how should an export policy be configured to export only the 50.50.1.0/24 RIP summary route into OSPF?

A. [edit policy-options policy-statement RIP-redist] [email protected]# show
term 1 {
from {
protocol rip;
route-filter 50.50.1.0/24 exact;
}
then accept;
}
term 2 {
from {
protocol rip;
route-filter 50.50.0.0/24 upto /27;
}
then reject;
}
term 3 {
from protocol rip;
then accept;
}
B. [edit policy-options policy-statement RIP-redist] [email protected]# show
term 1 {
from {
protocol rip;
route-filter 50.50.0.0/24 upto /27;
}
then reject;
}
term 2 {
from {
protocol rip;
route-filter 50.50.1.0/24 exact;
}
then accept;
}
term 3 {
from protocol rip;
then accept;
}
C. [edit policy-options policy-statement RIP-redist] [email protected]# show
term 1 {
from {
protocol rip;
route-filter 50.50.0.0/16 prefix-length-range /24-/26;
}
then reject;
}
term 2 {
from {
protocol rip;
route-filter 50.50.1.0/24 exact;
}
then accept;
}
D. [edit policy-options policy-statement RIP-redist] [email protected]# show
term 1 {
from {
protocol rip;
route-filter 50.50.1.0/24 exact;
}
then accept;
}
term 2 {
from {
protocol rip;
route-filter 50.50.0.0/16 prefix-length-range /24-/26;
}
then reject;
}

Answer: D

Question: 23

Referring to the exhibit, you have configured an L3VPN that connects Site-1 and Site-2 together, but the BGP routes are being hidden on the PE routers. The topology in this scenario is shown below.
Site-1 > PE-1 > P-1 > P-2 > PE-2 > Site-2
Which two acttions would allow communication Site-1 and Site-2? (Choose two.)

A. Disable CSPF on under MPLS on P-1 and P-2.
B. Configure DGP on P-1 and P-2.
C. Enable RSVP for all interfaces on P-1 and P-2.
D. Enable LDP for all interfaces on all routers.

Answer: C, D

Question: 24

A layer 2 circuit (RFC 4447) is established between two PE routers to provide connectivity between two customer sites. Which two statements related to this deployment are true?

A. Kompella encapsulation is used in the data plane communications.
B. LDP must be used for the control plane communications
C. BGP must be used for the control plane communications.
D. Martini encapsulation is used in the data plane communications.

Answer: B, D

Question: 25

Referring to the exhibit, which router will be the RP?

A. R4 for all groups
B. R1 for group 224.1.1.11 and R4 for all other groups
C. R1 for all groups
D. R4 for group 224.1.1.12 and R1 for all other groups

Answer: A

Question: 26

You must ensure that r1’s IPv4 loopback address exists in r3’s inet 0 routing table
Referring to the exhibit, which statement is true?

A. An IPv4 unicast realm can be enabled on each router.
B. A policy can be configured on M to redistribute 172.16.100.1/32 into OSPFv2, which would cause r3 to eventually learn the route and place it into inet0.
C. A RIB group can be configured on r3 to copy that route into inet 0 because 172.16.100.1/32 exists in r3’s inet6.0 table
D. A policy can be configured on r1 to redistribute 172 16 100 1/32 into OSPFv3, which would cause r3 to eventually learn the route and place it into inet 0.

Answer: C

New Updated JN0-661 Exam Questions JN0-661 PDF dumps JN0-661 practice exam dumps: https://www.dumpsschool.com/JN0-661-exam-dumps.html

About admin

Check Also

[2018 Version] JN0-1330 Exam Questions with Free PDF and Practice Test Software

After Deep Analysis our experts prepared Juniper Networks Design – Security JN0-1330 Exam practice test …